Select Finishers

Hubbard Select Liquid Supplements

Hubbard Select Finisher Liquid Supplements are premium supplements for use in feedlot rations.

Select Finisher Liquid Supplements are fully fortified offering a convenient way to feed supplemental protein, vitamins and minerals (including calcium) that feedlot cattle need.

About the Product

Liquid Advantages

  • Convenient and flexible.
  • No need to add messy dry minerals.
  • Protein supplements do not need to be added or mixed separately.
  • Conditions feed.
  • Highly palatable means of providing dry ingredients.
  • Prevents separation of dry minerals and vitamins in the mix.

Quality Ingredients

Select Grower Liquid Supplement provides supplemental protein, vitamins and mineral that feedlot cattle need, using quality ingredients.

Concentrated Nutrition

More nutrition in less volume — Growing rations need to provide the maximum nutrients possible. Select Grower Liquid Supplement can help increase the nutrient density in rations because they are nutritionally dense liquids.

Choice of Additives

Proper use of feed additives can increase weight gain and feed utilization; refer to product tag for specific claim. Select Grower Liquid Supplement is available with feed additives at FDA-approved levels.

Nutrient Analysis

  #0892 #084J #0893 #087K
Crude Protein, min % 40.0 40.0 50.0 50.0
Non-Protein Nitrogen, max % 38.0 39.0 48.0 49.0
Crude Fat, min % 0.1 0.1 0.1 0.1
Calcium, min % 7.0 10.0 7.0 10.0
Calcium, max % 8.0 11.0 8.0 11.0
Salt, min % 3.5 4.0 3.5 3.5
Salt, max % 4.5 5.0 4.5 4.5
Potassium (K), min % 3.0 2.5 3.0 2.5
Vitamin A, min IU/lb. 30,000 30,000 30,000 30,000
Vitamin D, min IU/lb. 7,500 7,500 7,500 7,500
Vitamin E, min IU/lb. 50 50 50 50
Feeding Directions

Liquid supplements stored in re-circulating tank systems: Re-circulate immediately prior to use moving no less that 1 percent of the tank contents per minute from the bottom of the tank to the top, for not less than 10 minutes. Re-circulate daily, as described above, even when supplement is not used.

Liquid supplements stored in mechanical air or other agitation-type tank systems: Agitate immediately prior to use for not less than 10 minutes, creating a turbulence at the bottom of the tank that is visible at the top. Agitate daily, as described above even when supplement is not used.

Directions for Use:
Mix this product with grain and roughage to provide the recommended feeding rate. Maximum inclusion of this product should not exceed upper recommended feeding rate because this level provides 3.0 mg supplemental selenium, the maximum permitted. Inclusion of this product in the complete feed should be reduced if other sources of supplemental selenium are utilized.

Medicated Directions For Use:
Please refer to the tag for specific feeding directions.

Suggestion:
Use of this product will raise the moisture content of feeds to which it is applied. If anticipated final feed moisture is to exceed 12% and storage for periods longer than 2 to 3 days is expected, special consideration to the inclusion of preservatives in needed. Your sales representative will provide assistance if needed.

Caution

This product, which contains added copper, must not be fed to sheep or related species that have a low tolerance level to copper.

Product Number

#0892 — Select 40 Finisher 7.0 Ca
#084J — Select 40 Finisher 10.0 Ca
#0893 — Select 50 Finisher 7.0 Ca
#087K — Select 50 Finisher 10.0 Ca

All products may not be available in all market areas and other products may be offered. Check with your local Hubbard shipping plant or sales representative.

Please Note: This product information sheet is meant to serve as a general overview and is not intended to replace the product label. Always refer directly to the product label for the most up-to-date nutrient content and feeding directions.