Select Co-Product Supplements

Hubbard Select Liquid Supplements

Hubbard Select Co-Product Liquid Supplements are premium supplements specifically formulated for balancing co-products in feedlot rations. Select Co-Product Liquid Supplements are fully fortified offering a convenient way to feed supplemental protein, vitamins and minerals (including calcium) that feedlot cattle need.

About the Product

Liquid Advantages

  • Convenient and flexible.
  • No need to add messy dry minerals.
  • Protein supplements do not need to be added or mixed separately.
  • Conditions feed.
  • Highly palatable means of providing dry ingredients.
  • Prevents separation of dry minerals and vitamins in the mix.

Quality Ingredients

Select Co-Product Liquid Supplements provide supplemental protein, vitamins, minerals and fat that feedlot cattle need using quality ingredients.

Easy Handling

  • Mixes well with other feeds.
  • Reduces fines and dust.
  • Cannot be sorted out by cattle.

Choice of Additives

Proper use of feed additives can increase weight gain and feed utilization; refer to product tag for specific claim. Select Co-Product Liquid Supplement is available with feed additives at FDA-approved levels.

Nutrient Analysis

  #087G #087H
Crude Protein, min % 10.0 28.0
Non-Protein Nitrogen, max % 5.0 24.0
Crude Fat, min % 0.1 0.1
Calcium, min-max % 10.5-11.5 10.5-11.5
Salt (NaCl), min-max % 3.5-4.5 3.5-4.5
Potassium (K), min % 1.8 1.5
Thiamine, min mg/lb. 100 100
Vitamin A, min IU/lb. 40,000 40,000
Vitamin D, min IU/lb. 10,000 10,000
Vitamin E, min IU/lb. 65 65
Feeding Directions

Liquid Supplements stored in re-circulating tank systems: Re-circulate immediately prior to use moving no less that 1 percent of the tank contents per minute from the bottom of the tank to the top, for not less than 10 minutes. Re-circulate daily, as described above, even when supplement is not used.

Select Growers stored in mechanical, air or other agitation-type tank systems: Agitate immediately prior to use for not less than 10 minutes, creating turbulence at the bottom of the tank that is visible at the top. Agitate daily, as described above even when supplement is not used.

Directions For Use:
Mix this product with grain and roughage to provide 0.6 to 1.1 lbs. per head per day (basis a 1,000 pound animal) in the complete feed. Maximum inclusion of this product should not exceed 1.1 lbs. per head per day because this level provides 3.0 mg supplemental selenium, the maximum permitted. Inclusion of this product in the complete feed should be reduced if other sources of supplemental selenium are utilized.

Suggestion:
Use of this product will raise the moisture content of feeds to which it is applied. If anticipated final feed moisture is to exceed 12% and storage for periods longer than 2 to 3 days is expected, special consideration to the inclusion of preservatives in needed. Your sales representative will provide assistance if needed. 

Caution

This product, which contains added copper, must not be fed to sheep or related species that have a low tolerance level to copper.

Product Number

#087G — Select 10 Co-Product Balancer
#087H — Select 28 Co-Product Balancer

All products may not be available in all market areas and other products may be offered. Check with your local Hubbard shipping plant or sales representative.

Please Note: This product information sheet is meant to serve as a general overview and is not intended to replace the product label. Always refer directly to the product label for the most up-to-date nutrient content and feeding directions.